HQT Q1D is a digital handheld radio which is reliable and safe. Its ergonomic design makes it easy to carry and hide, and it is compliant with IP54 standard.
Q1D is a mid-end two-way radio with integrated chip, its customization is limited and it is applied in the commercial markets. If you have customized needs and requirements, HQT DH-9800/9100 is recommended.

Please contact our sales consultants for more product information. Get Support >>

Better and Clearer Communication
Q1D adopts digital technologies which effectively control background noise and squelch during voice transmission, so that it can transmit clear and desired voice with a 36mm-diameter speaker which enables users to hear the other side clearly even in noisy environments.
Secure Communication
Q1D can control the selection of RX contact or RX group of voice in digital mode. Every Q1D has a unique ID, which enables users to do one-to-one communication without being received by others. Besides, it supports encryption to voice in digital mode.
VOX;
One Touch Call;
Emergency Alarm;
Voice Prompts;
1 Programmable Key;
TOT (Time Out Timer);
Upgradeable Software;
Battery Lock with National Patent;
Signaling: DTMF Encode, QT/DQT;
Radio Disable, Radio Enable, Remote Monitor;
Voice Call Types: Private Call, Group Call and All Call Scan.

General
Frequency Range	VHF: 136-174MHz UHF: 400-470MHz
Channel Capacity	1024(64 Zones×16 Channels)
Rated Voltage	3.7V
Battery	1800mAh
Channel Spacing	25kHz/12.5kHz
Dust & Water Protection	IP54
Operating Temperature	-25℃~+60℃
Dimensions (H×W×D)	100.5×57×33mm
Weight	178g
Receiver
Sensitivity	Analog SINAD: 0.22μV/Digital 5%BER:0.22μV
Adjacent Channel Selectivity	60dB@12.5kHz / 70dB@25kHz
Intermodulation	65dB
Spurious Response Rejection	70dB
Hum and Noise	-40dB@12.5kHz /-45dB@25kHz
Conducted Spurious Emission	≤-57dBm
Audio Response	+1~-3dB
Audio Power Output	≥0.6W
S/N	>40dB
Transmitter
RF Power	High Power: 2W / Low Power: 1W
Modulation Limiting	≤2.5kHz @ 12.5kHz   ≤5kHz @ 25kHz
Conducted/Radiated Emission	≤-36dBm(<1GHz) / -30dBm(>1GHz)
Adjacent Channel Power	60dB @ 12.5kHz/70dB @ 20/25kHz
Audio Response	+1~-3dB
Audio Distortion	≤3%
Frequency Stability	±1.5ppm
FM Modulation	11KΦF3E @ 12.5kHz 16KΦF3E @ 25kHz
4FSK Digital Modulation	12.5kHz Data: 7K60F1D and 7K60FXD 12.5kHz Voice: 7K60F1E and 7K60FXE 12.5kHz Voice&Data: 7K60F1W
Digital Vocoder Type	AMBE+2TM
Digital Protocol	ETSI-TS102 361-1.-2.-3

All specifications are tested according to applicable standards and subject to changes without notice due to continuous development.