As a high-end portable radio, DH-9800 is fully developed by HQT based on TI OMAP platform and compliant with ETSI TS 102 361 protocol.

Totally customizable functions and features:

• Vibrate;
• Voice Recording (1G/2G);
• GPS (Optional);
• Bluetooth (Optional);
• Man Down (Optional).

We can offer API for second-development.
HQT TI OMAP Series digital portable radios include DH-9800 and DH-9100 (without screen and keyboard).

Please contact our sales consultants for more product information. Get Support >>

Dual Modes (Analog + Digital)
DH-9800 can operate in either analog or digital mode. It is compatible with the prevalent analog system, ensuring a smooth analog-to-digital transition.

Versatile Voice Calls
DH-9800 supports various voice call types, including Private Call, Group Call, All Call and Emergency Call.

Text Message
DH-9800 supports IP Data/Defined Data messages, including Private Message and Group Message.

Digital Signaling
DH-9800 supports various signaling, including Call Alert, Radio Check, Remote Monitor, Radio Disable and Radio Enable.

Vibrate 
This feature is helpful in reminding you of the reception of any Private Call, Call Alert or Text Message under noisy or low-volume conditions.

Various Analog Signaling Types
DH-9800 supports various analog signaling (DTMF, 2-Tone, 5-Tone, QDC-1200 and CDCSS/CTCSS), providing higher function expansion capacity.

Scan
DH-9800 supports scanning of analog voice and signaling, digital voice and data. It can also support mixed modes scanning.

IP Multi-site Connect and Roaming
DH-9800 supports communication with any other terminals as well as smooth Roaming within IP Multi-site Connect System.

Advanced Features (Optional)
DH-9800 supports various optional advanced features including Man Down, GPS and Bluetooth.

Privacy of Voice and Data
DH-9800 supports analog scrambling, and digital encryption using Advanced Encryption Standard (AES) and ARCFOUR (ARC4) encryption algorithm to voice with 256-bit encryption.

Upgrade to Tier-III
Customer can upgrade DH-9800's software to Tier-III without buying new devices.

General
Frequency Range	VHF: 136-174MHz UHF: 350-400MHz; 400-470MHz; 450-520MHz
Channel Capacity	1024
Zone Capacity	64 (Each with a Maximum of 16 Channels)
Channel Spacing	12.5kHz (Digital)  25/20/12.5kHz (Analog)
Operating Voltage	7.4V
Battery	2000mAh / 2500mAh (Optional) Li-ion Battery
Battery Life  (5-5-90 Duty Cycle, High TX Power)	Analog: Above 11 Hours  Digital: Above 15 Hours
Frequency Stability	±1.0ppm
Antenna Impedance	50Ω
Dimensions (H×W×D)	130×55×35mm
Weight	333g
LCD Display	1.8 TFT
Receiver
Sensitivity (Analog)	0.22μV (12dB SINAD) / 0.22μV (Typical) (12dB SINAD)
Sensitivity (Digital)	0.22μV/BER 5%
Selectivity  TIA-603  ETSI	≥60dB @ 12.5kHz / 70dB @ 20&25kHz
Intermodulation  TIA-603  ETSI	≥70dB @ 12.5/20/25kHz
S/N	40dB @ 12.5kHz
Rated Audio Power Output	1.5W
Rated Audio Distortion	≤3%
Audio Response	+1~-3dB
Conducted Spurious Emission	<-57dBm
Transmitter
RF Power Output	VHF High Power: 5W  UHF High Power: 4W VHF Low Power: 1W  UHF Low Power: 1W
FM Modulation	11KΦF3E @ 12.5kHz 14KΦF3E @ 20kHz 16KΦF3E @ 25kHz
4FSK Digital Modulation	12.5kHz Data Only: 7K60FXD 12.5kHz Data & Voice: 7K60FXW
Conducted/Radiated Emission	-36dBm<1GHz / -30dBm>1GHz
Modulation Limiting	±2.5kHz @ 12.5kHz ±4kHz @ 20kHz ±5kHz @ 25kHz
FM Noise	40dB @ 12.5kHz / 43dB @ 20 kHz / 45dB @25kHz
Adjacent Channel Power	60dB @ 12.5kHz  70dB @ 20/25kHz
Audio Distortion	≤3%
Digital Vocoder Type	AMBE3000++
Digital Protocol	ETSI-TS102 361-1.-2.-3
Environmental Specifications
Operating Temperature	-30℃~ +60℃
Storage Temperature	-40℃~ +85℃
ESD	IEC 61000-4-2 (Level 4) ±8kV (Contact) ±15kV (Air)
U.S. Military Standard	MIL-STD-810 C/D/E/F/G
Dust & Water Intrusion	IP67 Standard
Humidity	Per MIL-STD-810 C/D/E/F/G Standard
Shock & Vibration	Per MIL-STD-810 C/D/E/F/G Standard

All specifications are tested according to applicable standards and subject to changes without notice due to continuous development.