DH-8100 is a mid-end two-way radio with integrated chip without screen and keyboard, its customization is limited and it is applied in the commercial markets.

We strongly recommend DH-9800/9100 for your customized needs and requirements.

Please contact our sales consultants for more product information. Get Support >>

Dual Modes (Analog + Digital)
DH-8100 can operate in either analog or digital mode. It is compatible with the prevalent analog system, ensuring a smooth analog-to-digital transition.  

Versatile Voice Calls
Intelligent signaling of DH-8100 supports various voice call types, including Private Call, Group Call, All Call and Emergency Call.

Vibrate (Optional)
This feature is helpful in reminding you of the reception of any Private Call, Call Alert under noisy or low-volume conditions.

Various Analog Signaling Types (Under Development)
DH-8100 supports various analog signaling types (DTMF Encode), providing higher function expansion capacity.

Secure Communication
DH-8100 provides high-level digital encryption utilizing advanced 216-bit encryption algorithm; In analog mode, it also provides Scrambler feature (Selectable).

Upgradeable Software
With this capability, you can enjoy further features without the need to buy a new radio.

Highly Compatible Accessory Socket

General
Frequency Range	VHF: 136-174MHz UHF: 350-400MHz; 400-470MHz; 450-520MHz
Channel Capacity	16
Channel Spacing	12.5kHz (Digital)  25/12.5kHz (Analog)
Operating Voltage	7.4V (Rated)
Battery	2200mAh Li-ion Battery
Battery Life (5-5-90 Duty Cycle, High TX Power)   High-capacity 2200mAh Li-ion Battery	Analog: Above 11.5 Hours  Digital: Above 16.5 Hours
Frequency Stability	±1.5ppm
Antenna Impedance	50Ω
Dimensions (H×W×D)	126×53×33mm
Weight	300g
Front Case	PC
Receiver
Sensitivity (Analog)	0.3μV (12dB SINAD) 0.22μV (Typical) (12dB SINAD)  0.4μV (20dB SINAD)
Sensitivity (Digital)	0.3μV/BER 5%
Selectivity  TIA-603  ETSI	60dB @ 12.5kHz / 70dB @ 20/25kHz 60dB @ 12.5kHz / 70dB @ 20/25kHz
Intermodulation  TIA-603  ETSI	70dB @ 12.5/20/25kHz / 65dB @ 12.5/20/25kHz
S/N	40dB @ 12.5kHz / 43dB @ 20kHz / 45dB @ 25kHz
Rated Audio Power Output	1.5W
Rated Audio Distortion	≤3%
Audio Response	+1~-3dB
Conducted Spurious Emission	<-57dBm
Transmitter
RF Power Output	VHF High Power: 5W  UHF High Power: 4W VHF Low Power: 1W  UHF Low Power: 1W
FM Modulation	11KΦF3E @ 12.5kHz 14KΦF3E @ 20kHz  16KΦF3E @ 25kHz
4FSK Digital Modulation	12.5kHz Data Only: 7K60FXD 12.5kHz Data & Voice: 7K60FXW
Conducted/Radiated Emission	-36dBm<1GHz / -30dBm>1GHz
Modulation Limiting	±2.5kHz @ 12.5kHz ±4.0kHz @ 20kHz ±5.0kHz @ 25kHz
FM Noise	40dB @ 12.5kHz / 43dB @ 20 kHz / 45dB @25kHz
Adjacent Channel Power	60dB @ 12.5kHz  70dB @ 20/25kHz
Audio Distortion	≤3%
Digital Vocoder Type	AMBE3000+
Digital Protocol	ETSI-TS102 361-1.-2.-3
Environmental Specifications
Operating Temperature	-30℃ ~ +60℃
Storage Temperature	-40℃ ~ +85℃
ESD	IEC 61000-4-2 (Level 4) / 8kV (Contact) / 15kV (Air)
U.S. Military Standard	MIL-STD-810 C/D/E/F/G
Dust & Water Intrusion	IP67 Standard
Humidity	Per MIL-STD-810 C/D/E/F/G Standard
Shock & Vibration	Per MIL-STD-810 C/D/E/F/G Standard

All specifications are tested according to applicable standards and subject to changes without notice due to continuous development.